Reusable RV departure checklist board with sliding toggles. Choose the towable layout or the motorhome layout. Designed and made to order by FORG3D. Introductory launch price $69.95 for one complete board.
Stop Wondering What You Forgot
Breaking camp involves several steps. This reusable board keeps the important departure checks visible in one place. It is intended to help reduce missed steps without relying on memory or a checklist buried in a phone.
Choose the Right Board for Your RV
Two standardized layouts are available. Neither layout is claimed to apply to every RV without your own verification. Checklist needs can vary by RV, equipment, and setup.
Towable Camper / Travel Trailer / Fifth Wheel
Designed around the departure tasks associated with towable RVs, including travel trailers and fifth wheels. This is a standardized towable layout, not a model-specific custom board.
Motorhome
Designed around the departure tasks associated with motorized RVs. This is a standardized motorhome layout, not a model-specific custom board.
Slide It Right When It’s Ready
The board is a repeatable visual departure check. Before leaving, complete each listed task and move its sliding toggle to the right to mark it ready. When the RV reaches its destination and is set up, reset all toggles to the left so the board is ready for the next departure. The towable version contains checklist items appropriate for travel trailers and fifth wheels. The motorhome version contains checklist items appropriate for motorized RVs. This is a reminder and organization tool. Owners remain responsible for following their RV manufacturer’s instructions, performing a complete safety inspection, and confirming that their vehicle is safe for travel.
Built for Repeated Use
- Overall size: approximately 6.5 inches wide × 11.75 inches tall
- Engraved 1/16-inch two-tone acrylic face attached to a rigid 1/8-inch black acrylic backing
- Reusable sliding checklist toggles
- Designed and made by FORG3D
- Made to order
- Available in separate towable-RV and motorhome layouts
- No personalization or unrelated customization options are included in this standard listing
Available Acrylic Finishes
Every finish option refers to the engraved 1/16-inch two-tone acrylic face attached to the rigid 1/8-inch black acrylic backing. All five standard finishes are included at the same $69.95 price.
- Stainless-Look Acrylic — Engraves Black
- Gold-Look Acrylic — Engraves Black
- Cashew Wood-Look Acrylic — Engraves Black
- Gloss Black Acrylic — Engraves Gray
- White Acrylic — Engraves Black
Stainless-Look Acrylic has a stainless-steel-inspired surface and engraves black. It is acrylic, not metal. Gold-Look Acrylic has a metallic gold appearance and engraves black. It is acrylic, not real gold or metal. Cashew Wood-Look Acrylic has a wood-inspired surface and engraves black. It is acrylic, not natural wood. Gloss Black Acrylic engraves gray. White Acrylic engraves black.
The listed engraving color is the contrasting color revealed when the face material is engraved. Actual appearance may vary slightly because of lighting, screen settings, engraving settings, and material batches. All five standard finishes use the same rigid black acrylic backing and functional sliding-toggle design.
Looking for a different color or specialty acrylic finish? Additional options may be available by special request. Contact FORG3D before ordering to confirm material availability, pricing, engraving color, and production time.
What’s Included
- One RV Ready-to-Roll checklist board in the selected layout
- Integrated sliding checklist toggles
Production and Shipping
Typical production time is 1–2 business days when materials are in stock. If materials must be ordered, allow an additional 3–5 business days for them to arrive before production begins.
Because this board is $69.95, standard shipping is calculated at checkout unless additional merchandise brings the eligible merchandise subtotal over $99. Eligible orders over $99 receive free standard shipping to the lower 48 states. Expedited shipping and local pickup in Port Charlotte, Florida, follow the same options already offered on the site.
Important Safety Notice
This checklist board is a supplemental reminder and organization tool. It does not replace your RV manufacturer’s instructions, owner’s manual, maintenance requirements, safety procedures, or a complete pre-trip inspection. Checklist needs can vary by RV, equipment, and setup. The owner or operator is responsible for verifying that all required travel preparations have been completed and that the RV is safe for operation.
Frequently Asked Questions
Which version should I choose?
Choose Towable Camper / Travel Trailer / Fifth Wheel if you tow a travel trailer or fifth wheel. Choose Motorhome if you drive a motorized RV. These are standardized layouts, not boards built for one specific model. Confirm the listed checks fit your RV before ordering. For a substantially different or specially requested project, use the quote page. Availability and pricing for custom work are not promised on this listing.
How do the sliding toggles work?
Before leaving, complete each listed task and move its sliding toggle to the right to mark it ready. After you arrive and set up, reset every toggle to the left so the board is ready for the next departure. The toggles are reusable sliding markers. They are not switches, electronic controls, lights, magnets, or dry-erase markers.
What size is the board?
Overall size is approximately 6.5 inches wide × 11.75 inches tall.
What materials are used?
The board is made with an engraved 1/16-inch two-tone acrylic face attached to a rigid 1/8-inch black acrylic backing, plus reusable sliding checklist toggles. It is designed and made to order by FORG3D.
Is the checklist customized for my exact RV?
No. This standard listing includes one of two standardized layouts — towable RV or motorhome — with no personalization. For a substantially different or specially requested project, contact FORG3D through the quote page. That request does not promise availability or pricing.
How long does production take?
Typical production time is 1–2 business days when materials are in stock. If materials must be ordered, allow an additional 3–5 business days for them to arrive before production begins.
What acrylic finishes are available?
Standard choices include Stainless-Look Acrylic that engraves black, Gold-Look Acrylic that engraves black, Cashew Wood-Look Acrylic that engraves black, Gloss Black Acrylic that engraves gray, and White Acrylic that engraves black. Additional colors and specialty acrylic finishes may be available by special request. Contact FORG3D before ordering to confirm material availability, pricing, engraving color, and production time.
Introductory Launch Price: $69.95. Full purchase. Quantity 1 means one complete checklist board.
